Description
Smart hang on automatic top up unit designed for small or nano aquariums with a dual safety sensor and diaphragm pump that can draw water from a reservoir next to a sump or from below in the aquarium cabinet.
A strong diaphragm pump and a dual optical sensor are combined in one compact hang on unit so there is no pump to fit in the reservoir, keeping everything neat and tidy.
Features
Dual sensor with safety backup
Built in status indicator lights
Smart time out emergency function
Compact hang on design
Easy to install, plug and play
Includes intake prefilter
Built in pump for less cables
Check valve to prevent siphoning
Diaphram pump
Magnetic Mount for sensor
Compact Design
Integrated with one dual smart sensor and one diaphragm pump the Smart Nano ATO is extremely easy to install on your aquarium hang it on the side of the tank or outside edge of the sump, connect tubing, and plug in the power.
Easy to Assemble
The toolless design allows you to assemble and disassemble the Smart Nano ATO fully for maintanence in a minute, no screws or awkward fixings
Simple Installation
The Hang-On Back design simply slips over to top edge of the aquarium or sump and clamps into place using an adjustable holder suitable for 3-10mm thick glass. The easy-to-install dual sensor can be positioned at the desired water level using its magnetic holder.
Adjustable Sensor Cable Length
The sensor cable can be used at its full length of 45cm or be made shorter by storing any excess cable in the convinient space inside body of the ATO to give a clean and tidy install witout long trailing wires on display.
Specification
Power Input: 100-240 VAC 50-60Hz
Diaphragm Pump:
– Suction Head: 200cm / 6.5ft
– Flow Rate: 30 LPH / 7.9 GPH
Anti-Siphon Pressure: 60cm / 2ft
Glass Mounting Thickness:
– Sensor Magnet: 12.27mm / 1/2″
– Hang on Smart ATO: 3-10 mm / 0.12-0.39″
Cable Length:
– Sensor: 45cm / 1.5 feet
– Power Supply: 180cm / 6ft
Tubing:
– Length: 200cm / 6.5ft
– ID: 4mm / 5/32″ OD: 6.4mm / 1/4″
Reviews
There are no reviews yet.